Thursday, January 24, 2008

Needles notebook

I sent a birthday present to T42 from one of the forums I take part in, I love her creations and especially the way she combines needle craft in many of them, that's why I chose to make a needle notebook for her and took the opportunity to take pictures of the process so I can post it here. It's the same as the black and white one I gave to Michal and posted last week.
T42 is the one that took the picture of the completed notebook as I sent it off before I had the chance to take a proper picture so thank you T42!
First choose your patterned fabrics, I like using 2 different ones, one for the outside and a different one for the inside but you can use just the one pattern.
Start out by cutting out 2 pieces of fabric, size 15X20cm (6X7.8inch) each.
Cut one of the pieces in half, now you have 1 piece size 15X20cm’ (6X7.8inch) and 2 pieces 15X10cm’ (6X4inch).

Cut out relatively thin and light iron-on interface, a piece for each piece of fabric, cut the interface a little bigger than your fabric to make sure it’s all covered. The interface will prevent the fabric from fraying at the edges.

Take out your ironing board, lay out the fabrics on the interfacing, note the glossy glue on the one side of your interfacing, you need to have the sticky side up and the left side of your fabric on top of it.
Iron just enough to make the fabrics edges stick to the interface (5-10 seconds), now flip and iron from the back side. Do the same with all your fabric pieces.

After it cool’s off trim the edges of all 3 pieces.

Take your 2 small pieces and sew the length just on one side. I used a dark color thread so you can see it better but rather have your thread the same color as your fabric.
Lay both small pieces on top of the larger piece (the right side of the fabric on the right side of the fabric) their sewn side turning inside and sew all round.
I added 2 pieces of ribbon on both sides before sewing together so I can later close the notebook by tying a bow.

Now turn it over to the other side, you will get 2 pockets.

Iron both sides, inside and out to flatten it.

Cut out 2 pieces of double sided thick interface and place each piece inside each pocket.

Iron from both sides until it sticks; this will create a harder cover.

Inside your notebook sew a piece of felt; I used the blanket stitch round the felt.

Embellish your cover and there you have it.

Next time I’ll show you how I embroider letters.

I'm going away for the weekend so if you have any questions I'll be able to answer in a couple of days. Have a great weekend!

1 comment:

Unknown said...

woooow - thank you so much.
love it.